1000 lph ro plant

1000lph ro plant purify 900 to 1500 ltr.water per hour. It depends upon the TDS of raw water. It works upon 3000 tds.it has two pumps, two vessels, two big blue, four membranes, two membrane housing,4pressure guage, two flow meter, contractor based panel and ss skid.


industrial ro plant 1000lph1000lph ro plant

Our valued customers can avail the range of highly reliable Industrial RO Systems 1000LPH ro plant that are developed as per international quality norms and client’s technical demands. Widely appreciated for optimum performance, high water carrying capacity and low maintenance, our range of Industrial RO Systems 1000 LPH are highly demanded across various industries. Offered at industry leading rates our range has been successful in meeting clients’ demands and satisfy their water purification needs.

Description Features of 1000LPH ro plant

Technology : RO Membrane Based, (Model: 4040)
Electricity : 3.2KW/220v, 50Hz
Filtrations : Suspended Solids, Chemical Impurities, Bacteria like Cryptosporidium, Pseudomonas, and Pathogens e-coli.

Pre Filtration : Sand and Activated Carbon Filter, Micron Filter
Design to Work
Design to Work : TDS up to 3000ppm, Hardness 1600mg/I
Operating Mode : Automatic + Manual

Monitoring Accessories : MMIC Panel, Pressure Gauges, Flow Meters etc.
1- RAW WATER PUMP uded in Industrial RO Plant 1000LPH:
Purpose: To feed the dual media filter at pressure more than 3.0 bars, which is min. operating pressure for filters.

>Specifications< Sl. Parameter Descriptions (a) MOC CI (b) Type Horizontal Centrifugal © Flow Rate Min. 2200 Liters per hour (d) Head 35m (e) Power Required .75KW (f) Electrical 220V, Single phase, 50HZ (g) Cycle 2900 rpm (h) Make CRI (j) Quantity 1 One Nos. 2. Multi Grade Sand and Activated Carbon Filter Purpose: To remove the total suspended solids, dirt, iron, and reduce silt density Index which can foul the membranes and also absorb any type of colour,odour & test. Sl. Parameter DESCRIPTIONS (a) Make Pentair Water (b) MOC FRP/Poly glass © Diameter 14 x 65 (d) Quantity 1 Two Set (e) Media Anthracite, Pebble, Fine Sand& Activated Carbon 1000IDV 3. PIPING: Pipe of PVC 28 Bar tested pressure testing cock & pressure gauges at inlet-outlet of system Sl. Parameter DESCRIPTIONS (a) Make Astral (b) MOC U-PVC © Burst Pressure 28Kg/Bar (d) Quantity 1 1 Lot 4. MICRON FILTER: Purpose: To remove the fine particles up to 05 microns and reduce silt density Index levels to acceptable level. Housing: Sl. Parameter DESCRIPTIONS (a) Make RAVE Filtration (b) MOC of Housing PP © Length 20” (d) Diameter 5.5” (e) Quantity Two nos. Cartridge (f) Make Pure & Safe (g) Cartridge MOC Polypropylene (h) Length 20” (i) Diameter 4” (j) Quantity Two nos. (k) Micron Rating 05 Micron + 10 Micron 5. HIGH PRESSURE PUMP used in 1000LPH ro plant: Purpose: To Feed the Reverse Osmosis Membrane at pressure more than the osmotic pressure taking into consideration flux rate, flow and recovery. Specifications: Sl. Parameter DESCRIPTIONS of 1000lph ro plant: (a) MOC Stainless Steel (b) Type Vertical Multistage © Flow Rate 3000Liters Per Hours (d) Head 150mwc (e) Power Required 2.2 KW (f) Electrical 220V, Single phases, 50HZ (g) Cycle 2900 RPM (h) Make CRI Pumps (2-18) (i) Quantity 1 One nos. 6. RO MEMBRANE MODULE of 1000lph ro plant: Purpose: To remove the major part of TDS up to 98% by Reverse Osmosis Membranes arranged and designed to give adequate flow and recovery. Specifications: Sl. Parameter DESCRIPTIONS of 1000lph ro plant:
(a) Type Spiral Wounded
(b) Diameter of Membrane 4.0 Inch
© Length of Membrane 40” Inch
(d) No. of Membranes 4 Four nos.
(e) Recovery per Membrane 10-15%
(f) Salt rejection per Membrane Up to 99%
(g) Make of Membrane Vontron
(h) System Recovery Up to 40%

Purpose: To pack Reverse Osmosis Membranes and operate at high pressure up to300 psi.
(b) Diameter of pressure Vessel 4.5 Inch
© Length of Pressure vessel 2.2m
(d) No. of Pressure vessel 2
(e) No. of Membrane per vessel 2
(f) Make LINQ
(g) Position Horizontal, Parallel
(h) Arrays 1 No.

Purpose: Control Panel is provided as a safety measure for the pump & other electrical items.
(a) Complete Starters, overload relays.
(b) Voltmeter, Ammeter, MCB’s Indicating Lights
(c) Push Buttons
(d) Rocker switches for dozers
(e) Incomers Auto-manual switches

Sl. Equipment’s Specifications
(a) Flow Meter To measure the online flow of water
(b) Pressure Gauges For calculate ^ P for each unit in RO system


  • Dimensionally accurate
  • Compact design
  • Flawless nature.