1000 lph ro plant

(3 customer reviews)

Description

Our valued customers can avail the range of highly reliable Industrial RO Systems 1000 LPH that are developed as per international quality norms and client’s technical demands. Widely appreciated for optimum performance, high water carrying capacity and low maintenance, our range of Industrial RO Systems 1000 LPH are highly demanded across various industries. Offered at industry leading rates our range has been successful in meeting clients’ demands and satisfy their water purification needs.
Description Features
Technology : RO Membrane Based, (Model: 4040)
Electricity : 3.2KW/220v, 50Hz
Filtrations : Suspended Solids, Chemical Impurities, Bacteria like Cryptosporidium, Pseudomonas, and Pathogens e-coli.
Pre Filtration : Sand and Activated Carbon Filter, Micron Filter
Design to Work
Design to Work : TDS up to 3000ppm, Hardness 1600mg/I
Operating Mode : Automatic + Manual
Monitoring Accessories : MMIC Panel, Pressure Gauges, Flow Meters etc.
1- RAW WATER PUMP:
Purpose: To feed the dual media filter at pressure more than 3.0 bars, which is min. operating pressure for filters.
Specifications:
Sl. Parameter Descriptions
(a) MOC CI
(b) Type Horizontal Centrifugal
© Flow Rate Min. 2200 Liters per hour
(d) Head 35m
(e) Power Required .75KW
(f) Electrical 220V, Single phase, 50HZ
(g) Cycle 2900 rpm
(h) Make CRI
(j) Quantity 1 One Nos.
2. Multi Grade Sand and Activated Carbon Filter
Purpose: To remove the total suspended solids, dirt, iron, and reduce silt density Index which can foul the membranes and also absorb any type of colour,odour & test.
Sl. Parameter DESCRIPTIONS
(a) Make Pentair Water
(b) MOC FRP/Poly glass
© Diameter 14 x 65
(d) Quantity 1 Two Set
(e) Media Anthracite, Pebble, Fine Sand& Activated Carbon 1000IDV

3. PIPING:
Pipe of PVC 28 Bar tested pressure testing cock & pressure gauges at inlet-outlet of system
Sl. Parameter DESCRIPTIONS
(a) Make Astral
(b) MOC U-PVC
© Burst Pressure 28Kg/Bar
(d) Quantity 1 1 Lot

4. MICRON FILTER:
Purpose: To remove the fine particles up to 05 microns and reduce silt density Index levels to acceptable level.

Housing:
Sl. Parameter DESCRIPTIONS
(a) Make RAVE Filtration
(b) MOC of Housing PP
© Length 20”
(d) Diameter 5.5”
(e) Quantity Two nos.
Cartridge
(f) Make Pure & Safe
(g) Cartridge MOC Polypropylene
(h) Length 20”
(i) Diameter 4”
(j) Quantity Two nos.
(k) Micron Rating 05 Micron + 10 Micron

5. HIGH PRESSURE PUMP:
Purpose: To Feed the Reverse Osmosis Membrane at pressure more than the osmotic pressure taking into consideration flux rate, flow and recovery.
Specifications:
Sl. Parameter DESCRIPTIONS
(a) MOC Stainless Steel
(b) Type Vertical Multistage
© Flow Rate 3000Liters Per Hours
(d) Head 150mwc
(e) Power Required 2.2 KW
(f) Electrical 220V, Single phases, 50HZ
(g) Cycle 2900 RPM
(h) Make CRI Pumps (2-18)
(i) Quantity 1 One nos.

6. RO MEMBRANE MODULE:
Purpose: To remove the major part of TDS up to 98% by Reverse Osmosis Membranes arranged and designed to give adequate flow and recovery.
Specifications:
Sl. Parameter DESCRIPTIONS
(a) Type Spiral Wounded
(b) Diameter of Membrane 4.0 Inch
© Length of Membrane 40” Inch
(d) No. of Membranes 4 Four nos.
(e) Recovery per Membrane 10-15%
(f) Salt rejection per Membrane Up to 99%
(g) Make of Membrane Vontron
(h) System Recovery Up to 40%

7. RO PRESSURE VESSEL:
Purpose: To pack Reverse Osmosis Membranes and operate at high pressure up to300 psi.
Specifications:
Sl. Parameter DESCRIPTIONS
(a) MOC FRP LINQ
(b) Diameter of pressure Vessel 4.5 Inch
© Length of Pressure vessel 2.2m
(d) No. of Pressure vessel 2
(e) No. of Membrane per vessel 2
(f) Make LINQ
(g) Position Horizontal, Parallel
(h) Arrays 1 No.

08. ELECTRICAL PANEL
Purpose: Control Panel is provided as a safety measure for the pump & other electrical items.
Specifications:
Sl. DESCRIPTIONS
(a) Complete Starters, overload relays.
(b) Voltmeter, Ammeter, MCB’s Indicating Lights
(c) Push Buttons
(d) Rocker switches for dozers
(e) Incomers Auto-manual switches

10.INSTRUMENTATION
Sl. Equipment’s Specifications
(a) Flow Meter To measure the online flow of water
(b) Pressure Gauges For calculate ^ P for each unit in RO system

Features:

  • Dimensionally accurate
  • Compact design
  • Flawless nature.

3 reviews for 1000 lph ro plant

  1. Eswaramoorthy

    Please send the quote for Item code 2000 LPH and 5000 LPH

  2. Abhay

    Good

  3. admin

    very good

Add a review

Your email address will not be published. Required fields are marked *