100 lph commercial ro plant

Description

Our valued customers can avail the range of highly reliable Commercial RO Systems 100 LPH that are developed as per international quality norms and client’s technical demands. Widely appreciated for optimum performance, high water carrying capacity and low maintenance, our range ofCommercial RO Systems 100 LPH are highly demanded across various Commercial purpose. Offered at Commercialy leading rates our range has been successful in meeting clients’ demands and satisfy their water purification needs.
Features:

  • Dimensionally accurate
  • Compact design
  • Flawless nature.

Description Features
Technology : RO Membrane Based, (Model: 300gpd)
Electricity : .37KW/220v, 50Hz
Filtrations : Suspended Solids, Chemical Impurities, Bacteria like Cryptosporidium, Pseudomonas, and Pathogens e-coli.
Pre Filtration : Micron Filter
Post Filtration : GAC
Design to Work : TDS up to 2000ppm, Hardness 1000mg/I
Operating Mode : Manual
Monitoring Accessories : Switch board
Pumps–CRI
pipe&fittings-Astral
ss skid
1- Raw Water Pump:
Purpose: To feed the dual media filter at pressure more than 3.0 bars, which is min. operating pressure for filters.
Specifications:
Sl. Parameter Descriptions
(a) MOC CRI
(b) Type Horizontal Centrifugal
(c) Flow Rate Max. 1200 Liters per hour
(d) Head 18m
(e) Power Required .37KW
(f) Electrical 220V, Single phase, 50HZ
(g) Cycle 2800 rpm
(h) Make CRI
(j) Quantity 1 One Nos.
2. Piping:
Pipe of PVC 28 Bar tested pressure testing cock & pressure gauges at inlet-outlet of system
Sl. Parameter DESCRIPTIONS
(a) Make Astral
(b) MOC U-PVC
(c) Burst Pressure 28Kg/Bar
(d) Quantity 1 1 Lot

4. Micron Filter:
Purpose: To remove the fine particles up to 05 microns and reduce silt density Index levels to acceptable level.
Specifications:
Housing:
Sl. Parameter DESCRIPTIONS
(a) Make RAVE Filtration
(b) MOC of Housing PP
(c) Length 20”
(d) Diameter 4”
(e) Quantity Two nos.
Cartridge
(f) Make Pure & Safe
(g) Cartridge MOC Polypropylene
(h) Length 20”
(i) Diameter 2.5”
(j) Quantity Two nos.
(k) Micron Rating 05 Micron

6. RO Membrane Module:
Purpose: To remove the major part of TDS up to 98% by Reverse Osmosis Membranes arranged and designed to give adequate flow and recovery.
Specifications:
Sl. Parameter DESCRIPTIONS
(a) Type Spiral Wounded
(b) Diameter of Membrane 3.0 Inch
(c) Length of Membrane 12 inch
(d) No. of Membranes 2 three nos.
(e) Recovery per Membrane 10-15%
(f) Salt rejection per Membrane Up to 99%
(g) Make of Membrane vontron
(h) System Recovery Up to 40%
7. RO Pressure Vessel:
Purpose: To pack Reverse Osmosis Membranes and operate at high pressure up to 150 psi.
Specifications:
Sl. Parameter DESCRIPTIONS
(a) MOC FRP
(b) Diameter of pressure Vessel 3.5 Inch
(c) Length of Pressure vessel 13 inch
(d) No. of Pressure vessel 3
(e) No. of Membrane per vessel 1
(f) Make heathy
(g) Position Verticle
(h) Arrays 1 No.

Reviews

There are no reviews yet.

Be the first to review “100 lph commercial ro plant”

Your email address will not be published. Required fields are marked *